PL-IGT-1205AT

Endüstriyel Tip Media Converter (Industrial 10/100/1000T to 2-port 100/1000X SFP Media Converter)
1-port 10/100/1000T <-> 2-port 1000Base-SX/LX/BX SFP/mini-GBIC yuva (Port-1 ve Port-2)
IP-30, -40 ile 75 Derece C

EAN: 4711213689529
Bu Ürünün Yer Aldığı Kategori(ler)

İlginizi Çekebilir

AT-MC101XL

AT-MC103LH

AT-MC302

AT-MMC6005

BN-FS-SC-MM

BN-FS-ST-MM

DN-82020-1

DN-82021-1

DN-82110-1

DN-82130

PL-FT-801

PL-FT-802

PL-FT-802S15

PL-GT-1205A

PL-GT-802

PL-ICS-100

PL-ICS-105A

PL-ICS-2105A

PL-IFT-805AT

PL-VC-234

Physical Port

  • 1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
  • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured

Fiber Port Redundancy

  • Link status auto-detect and redundant on dual ports with the same connector type
  • Only Primary-Port is active at a time, the Backup-Port is blocked
  • When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically
  • Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port

Layer 2 Features

  • Supports auto negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • 9K Jumbo Frame Size support
  • Integrated address look-up engine, support 1K absolute MAC addresses
  • Automatic address learning and address aging

Industrial Case / Installation

- 12 to 48V DC, redundant power with polarity reverse protect function
- AC 24V power adapter acceptable
  • Slim IP30 metal case protection
  • DIN rail and wall mount design
  • Redundant Power Design
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hardware Specifications
Copper Port 1 x 10/100/1000Base-T RJ-45 TP
Auto-MDI/MDI-X, Auto-Negotiation
SFP / mini-GBIC Slots 2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2)
Compatible with 100Base-FX SFP
DIP Switch DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX
DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX
DIP-3: Switch mode / Fiber Redundant mode
Connector Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
LED 3 x LED for System and Power:
 ■ Green: DC Power 1
 ■ Green: DC Power 2
 ■ Green: Power Fault
2 x LED for Per Copper Port:
 ■ Green: 1000 LNK/ACT
 ■ Orange:100 LNK/ACT
1 x LED for Per mini-GBIC interface (Port-1 and Port-2):
 ■ Green: LNK/ACT
ESD Protection 6KV DC
EFT Protection 6KV DC
Enclosure IP30 type metal case
Installation DIN rail kit and wall mount ear
Dimensions (W x D x H) 135 x 87 x 32mm
Weight 505g
Power Requirements DC 12~48V or AC 24V
Redundant power with polarity reverses protection function
Power Consumption / Dissipation 4.8 watts/16BTU
Cable Twisted-Pair
 10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters
 100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
 1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
Fiber-Optic Cable
 1000Base-SX:
  50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m
 1000Base-LX:
  9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120
  kilometers (vary on SFP module)
 100Base-FX:
  ● 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2
   kilometers
  ● 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers
   (vary on SFP module)
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 1K entries
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch fabric 6Gbps
Throughput (packet per second) 4.46Mpps@64bytes
Maximum Transmit Unit 9216 bytes
Speed SX/LX: 2000Mbps (full-duplex)
FX: 200Mbps (full-duplex)
TP: 10/20Mbps, 100/200Mbps, 2000Mbps
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet / 10Base-T
IEEE 802.3u Fast Ethernet / 100Base-TX
IEEE 802.3ab Gigabit Ethernet / 1000Base-T
IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX
IEEE 802.3x Full-Duplex Flow Control
Regulation Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32(Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6(Vibration)
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)

 

 

 

PLANET Corporate Video

Video Izle

Bu ürünün tanıtımında kullanılmak üzere aşağıdaki görselleri kullanabilirsiniz. Görselleri bilgisayarınıza kaydetmek için görselin altında bulunan bağlantıya sağ tıklayıp "Hedefi farklı kaydet"e tıklamalısınız.

http://reklam.bimel.com.tr/banner/2415
Boyutları: 430px × 263px

Ankara Merkez
Tel: (312) 434-2245 Faks: (312) 431 19 53
İstanbul (Anadolu)
Tel: (216) 384-5061 Faks: (216) 384 50 26
İstanbul (Avrupa)
Tel: (212) 347-7540 Faks: (212) 347 75 44
İzmir
Tel: (232) 489-0755 Faks: (232) 425 21 49
Bursa
Tel: (224) 274-0055 Faks: (224) 273 00 26
2019© Bimel Elektronik Mamulleri Pazarlama A.Ş. internet sitesinin yayın hakları, tüm görsel malzeme ve bilgilerin elektronik ortamlar dahil kullanım hakkı sadece Bimel Elektronik Mamulleri Pazarlama A.Ş.'ne aittir. İzinsiz kullanmak, kopyalamak ve alıntı yapmak yasal kovuşturma hakkı doğurur.