İlginizi Çekebilir





















Standard Compliant Hardware Interface

  • Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps
  • One 10/100BASE-TX port and one PoE powered device (PD) port
  • One RJ11 port for phone line connection
  • European 86-type and 75-type wall outlet compatibility

Secure Network Connection

  • Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK (TKIP/AES encryption), 802.1x
  • Supports wireless MAC address filtering control to limit the connected wireless clients

Comprehensive Wireless Advanced Features

  • Multiple operation modes including AP (Multi-SSIDs), Client, Repeater/Universal Repeater, WDS Point-to-Point (PtP) and WDS Point-to-Multipoint (PtMP)
  • Up to 5 multiple-SSIDs to allow users to access different networks through a single AP
  • Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of multimedia application
  • Supports IAPP (Inter Access Point Protocol) wireless roaming to enable clients to roam across multiple APs
  • Provides 5-level Transmit Power Control to adapt various environments
  • Wireless schedule allows administrators to enforce time-based internet access
  • Self-healing (Schedule Reboot) mechanism for reliable connection

Easy Deployment & Centralized Management

  • Supports AP controller to enable administrator to configure and monitor multiple APs simultaneously
  • Flexible deployment with standard 802.3af/at PoE/PD supported
  • Stylish in-wall design perfectly matches the room decoration
  • Step-by-step configuration with intelligent setup wizard and graphical Web-based UI
  • Supports SNMP-based management interface
  • System status monitoring including associated client list and system log


Hardware Specifications
Interface PoE Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
※ IEEE 802.3af PoE PD Port
LAN Port: 1 x 10/100Mbps auto MDI/MDI-X RJ45 port
RJ11 Port: Connect to the telephone through the 4-conductor phone line
PoE 802.3af PoE PD, Class 3
Antenna Built-in 3dBi antenna x 2
Reset Button Reset button at side panel
(Press over 5 seconds to reset the device to factory default)
LED Indicators PWR/SYS LED
Material Plastic
Dimensions (W x D x H) 86 x 35 x 86 mm
Weight 76g
Power Requirements 802.3af/at PoE, 48-56V DC input, 0.35A (max.)
Power Consumption < 10W
Wireless interface Specifications
Standard Compliance with IEEE 802.11b/g/n
Frequency Band Europe -- ETSI: 2.412~2.472GHz
Operating Channel Europe -- ETSI: 1~13
Channel Width 20 or 20/40MHz
Data Transmission Rates ■ 802.11n (HT40):
 135/121.5/108/81/54/40.5/27/13.5Mbps (dynamic)
■ 802.11n (HT20):
 65/58.5/52/39/26/19.5/13/6.5Mbps (dynamic)
■ 802.11g: 54/48/36/24/18/12/9/6Mbps (dynamic)
■ 802.11b: 11/5.5/2/1Mbps (dynamic)
Transmission Distance 802.11n: up to 70m
802.11g: up to 30m
The estimated transmission distance is based on the theory.
The actual distance will vary in different environments.
Max. RF Power 802.11n: 17 ± 2dBm
802.11g: 17 ± 2dBm
802.11b: 18 ± 2dBm
Receiver Sensitivity IEEE 802.11b: -92dBm @ 1Mbps; -85dBm @ 11Mbps, PER < 8%
IEEE 802.11g: -88dBm @ 6Mbps; -73dBm @ 54Mbps, PER <10%
IEEE 802.11n: -90dBm @ MCS8; -70dBm @ MCS15, PER <10%
Data Rate IEEE 802.11b: 1/2/5.5/11Mbps
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
IEEE 802.11n: 300 Mbps in 40MHz mode/150Mbps in 20MHz mode
TX Power Provides 5-level Tx Power Control (100%, 70%, 50%, 35%, 15%)
Wireless Management Features
Operation Mode ■ Standalone AP
■ Managed AP
Wireless Mode ■ AP (Multiple-SSIDs)
■ Client
■ Repeater (WDS+AP)
■ Universal Repeater (AP+Client)
■ WDS PtP Bridge
■ WDS PtMP Bridge
Encryption Security ■ WEP (64-/128-bit) encryption security
■ 802.1x RADIUS Authentication
Wireless Security Wireless MAC address filtering (up to 20 entries)
Supports WPS (Wi-Fi Protected Setup)
SSID broadcast and hide
Wireless Advanced ■ Supports WMM (Wi-Fi Multimedia) for better data transmission of video or
 on-line demand
■ Supports wireless schedule
■ Multiple SSIDs: up to 5
■ Wireless Isolation: Enables it to isolate each connected wireless client of
 a BSSID from communicating with each other
■ IAPP (Inter Access Point Protocol): 802.11f wireless roaming
■ Provides wireless statistics, max. associated station number
Max. Supported Clients Wired: 253
2.4GHz Wireless: 32
LAN Built-in DHCP server supporting static IP address distribution
Supports static IP and dynamic IP
Supports UPnP
Supports 802.1d Spanning Tree
System Management Web-based (HTTP) management interface
Supports SNTP synchronization
Easy firmware upgrade via HTTP/TFTP (through AP controller)
Easily locate deployed APs through the LED control
Supports SNMP management, LED On/Off control, Schedule Reboot
Supports Smart Discovery Utility, System Log
Supports WAPC series of AP controllers for central management
Max. WDS Peers 8
IEEE Standards IEEE 802.11n (2T2R, up to 300Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control
Other Protocols and Standards CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP
Environment & Certification
Temperature Operating: -10 ~ 50 degrees C
Storage: -40 ~ 70 degrees C
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 90% (non-condensing)
Regulatory CE, RoHS






L2+ Centralized Wireless APs Management Solution with 802.3at PoE Intelligent Functions

Video Izle

Ankara Merkez
Tel: (312) 434-2245 Faks: (312) 431 19 53
İstanbul (Anadolu)
Tel: (216) 384-5061 Faks: (216) 384 50 26
İstanbul (Avrupa)
Tel: (212) 347-7540 Faks: (212) 347 75 44
Tel: (232) 489-0755 Faks: (232) 425 21 49
Tel: (224) 274-0055 Faks: (224) 273 00 26
2020© Bimel Elektronik Mamulleri Pazarlama A.Ş. internet sitesinin yayın hakları, tüm görsel malzeme ve bilgilerin elektronik ortamlar dahil kullanım hakkı sadece Bimel Elektronik Mamulleri Pazarlama A.Ş.'ne aittir. İzinsiz kullanmak, kopyalamak ve alıntı yapmak yasal kovuşturma hakkı doğurur.